Wholesale China Servo Motor For Machinery Suppliers Factories - Mitsubishi New And Original MR-JE-20A Servo Driver – HONGJUN

Short Description:

We're one of the most professional FA One-stop suppliers in China.Our main products including servo motor, planetary gearbox, inverter and PLC, HMI.Brands including Panasonic, Mitsubishi, Yaskawa, Delta, TECO, Sanyo Denki ,Scheider, Siemens , Omron and etc.; Shipping time: Within 3-5 working days after getting the payment. Payment way: T/T, L/C, PayPal, West Union, Alipay, Wechat and so on

Send email to us Whatsapp Email

Product Detail

Product Tags

Feedback (2)

We stay with the basic principle of "quality initially, services first, steady improvement and innovation to fulfill the customers" for your management and "zero defect, zero complaints" as the quality objective. To perfect our company, we give the goods while using the good high-quality at the reasonable selling price for Schneider Inverter Solar , Panasonic Servo Motor Made In Japan , Yaskawa Motor Inverter , We guaranteed high quality, if clients were not satisfied with the products' quality, you can return inside 7days with their original states.

Wholesale China Servo Motor For Machinery Suppliers Factories - Mitsubishi New And Original MR-JE-20A Servo Driver – HONGJUN Detail:

Spec Detail

Servo amplifier model MR-JE-		10A	20A	40A	70A	100A	200A	300A
Output	Rated voltage	3-phase 170 V AC
	Rated current[A]	1.1	1.5	2.8	5.8	6.0	11.0	11.0
Power supply input	Voltage/frequency (Note 1)	3-phase or 1-phase 200 V AC to 240 V AC, 50 Hz/60 Hz				3-phase or 1-phase 200 V AC to 240 V AC, 50 Hz/60 Hz (Note 9)		3-phase 200 V AC to 240 V AC, 50 Hz/60 Hz
	Rated current (Note 7)[A]	0.9	1.5	2.6	3.8	5.0	10.5	14.0
	Permissible voltage fluctuation	3-phase or 1-phase 170 V AC to 264 V AC				3-phase or 1-phase 170 V AC to 264 V AC (Note 9)		3-phase 170 V AC to 264 V AC
	Permissible frequency fluctuation	±5% maximum
Interface power supply		24 V DC ± 10% (required current capacity: 0.3 A)
Control method		Sine-wave PWM control/current control method
Tolerable regenerative power of the built-in regenerative resistor (Note 2, 3)[W]		-	-	10	20	20	100	100
Dynamic brake		Built-in (Note 4, 8)
Communication function		USB: Connect a personal computer (MR Configurator2 compatible) RS-422/RS-485 (Note 10): Connect a controller (1 : n communication up to 32 axes) (Note 6)
Encoder output pulse		Compatible (A/B/Z-phase pulse)
Analog monitor		2 channels
Position control mode	Maximum input pulse frequency	4 Mpulses/s (when using differential receiver), 200 kpulses/s (when using open-collector)
	Positioning feedback pulse	Encoder resolution: 131072 pulses/rev
	Command pulse multiplying factor	Electronic gear A/B multiple, A: 1 to 16777215, B: 1 to 16777215, 1/10 < A/B < 4000
	Positioning complete width setting	0 pulse to ±65535 pulses (command pulse unit)
	Error excessive	±3 rotations
	Torque limit	Set by parameters or external analog input (0 V DC to +10 V DC/maximum torque)
Speed control mode	Speed control range	Analog speed command 1:2000, internal speed command 1:5000
	Analog speed command input	0 V DC to ±10 V DC/rated speed (Speed at 10 V is changeable with [Pr. PC12].)
	Speed fluctuation rate	±0.01% maximum (load fluctuation 0% to 100%), 0% (power fluctuation: ±10%) ±0.2% maximum (ambient temperature: 25℃ ± 10 ℃) only when using analog speed command
	Torque limit	Set by parameters or external analog input (0 V DC to +10 V DC/maximum torque)
Torque control mode	Analog torque command input	0 V DC to ±8 V DC/maximum torque (input impedance: 10 kΩ to 12 kΩ)
	Speed limit	Set by parameters or external analog input (0 V DC to ± 10 V DC/rated speed)
Positioning mode		Point table method, program method
Servo function		Advanced vibration suppression control II, adaptive filter II, robust filter, auto tuning, one-touch tuning, tough drive function, drive recorder function, machine diagnosis function, power monitoring function
Protective functions		Overcurrent shut-off, regenerative overvoltage shut-off, overload shut-off (electronic thermal), servo motor overheat protection, encoder error protection, regenerative error protection, undervoltage protection, instantaneous power failure protection, overspeed protection, error excessive protection
Compliance to global standards		Refer to “Conformity with global standards and regulations” in the catalog.
Structure (IP rating)		Natural cooling, open (IP20)					Force cooling, open (IP20)
Close mounting (Note 5)	3-phase power supply input	Possible
	1-phase power supply input	Possible				Not possible		-
Environment	Ambient temperature	Operation: 0 ℃ to 55 ℃ (non-freezing), storage: -20 ℃ to 65 ℃ (non-freezing)
	Ambient humidity	Operation/Storage: 90 %RH maximum (non-condensing)
	Ambience	Indoors (no direct sunlight); no corrosive gas, inflammable gas, oil mist or dust
	Altitude	1000 m or less above sea level
	Vibration resistance	5.9 m/s2 at 10 Hz to 55 Hz (directions of X, Y and Z axes)
Mass[kg]		0.8	0.8	0.8	1.5	1.5	2.1	2.1

ABOUT JE DRIVER:
1. Rated output and speed of a servo motor are applicable when the servo amplifier, combined with the servo motor, is operated within the specified power supply voltage and frequency.
2. Select the most suitable regenerative option for your system with our capacity selection software.
3. Refer to “Regenerative Option” in the catalog for the tolerable regenerative power [W] when regenerative option is used.
4. When using the built-in dynamic brake, refer to “MR-JE-_A Servo Amplifier Instruction Manual” for the permissible load to motor inertia ratio.
5. When the servo amplifiers are closely mounted, keep the ambient temperature within 0 ℃ to 45 ℃, or use them with 75% or less of the effective load ratio.
6. RS-422 communication function is available with the servo amplifiers manufactured on December 2013 or later. RS-485 communication function is available with the servo amplifiers manufactured on May 2015 or later. Refer to “MR-JE-_A Servo Amplifier Instruction Manual” for how to verify the manufacturing date of the products.
7. This value is applicable when a 3-phase power supply is used.
8. The coast distance by dynamic brake of HG-KN/HG-SN servo motor series may be different from prior HF-KN/HF-SN. Contact your local sales office for more details.
9. When 1-phase 200 V AC to 240 V AC power supply is used, use them with 75% or less of the effective load ratio.
10. Compatible with Mitsubishi general-purpose AC servo protocol (RS-422/RS-485 communication) and MODBUS® RTU protocol (RS-485 communication).

SOLUTIONS OF MITSUBISHI DRIVER:

(1) Automotive/ Automotive Parts: In vehicle manufacturing plants that handle a vast number of parts and wide variety of processes, there is a need to solve various issues such as responding to mixed production of many different car models, improving production speed and quality, considering worker safety and engaging in environment-oriented initiatives.

(2) Electrical & Electronic:Electrical and electronic fields require elaborate and complex work, yet a high percentage of tasks are still performed manually. A major issue faced is how to automate the processes of part loading, surface implementation, PCB assembly, unit assembly and shipment in order to reduce human error.

Product detail pictures: